|
|
| | |
|
Electronic Lock Instructions For Changing The Combination
GSP Lock
Changing the Combination
Factory Set Combination 1 - 2 - 3 - 4 - 5 - 6
We recommend that you change your combination before you begin using your new gun safe. It is a simple process but must be executed exactly. First, select a six (6) digit combination that you can easily remember and then follow the instructions below:
1. Enter your existing combination and open the door, with the locking bolts extended.
THE DOOR SHOULD ALWAYS BE OPEN WHEN YOU ARE CHANGING COMBINATIONS.
2. Enter in six (6) zeroes. This will put you in programming mode. (You will hear a double beep)
3. Enter in your existing six (6) digit combination. (You will hear a double beep)
4. Enter your new six (6) digit combination. (You will hear a double beep)
5. Enter your new six (6) digit combination again. (You will hear a double beep)
6. Wait approximately 10 seconds and then enter your new combination.
7. If the procedure was executed properly, you will be able to rotate the handle.
8. If the gun safe will not open, the procedure was incorrectly executed and the combination is still your existing combination in Step 3. Leave the door open and begin with Step 2.
* If the door will not open after entering your combination or makes several beeps after entering the code, it is usually time for a battery change. A low battery is indicated by a yellow light.
If you enter your code and hear 2 beeps but no click - Please change the battery.
If you enter you code and hear 5 beeps - Please click here to download the combination request form.
| |
| | |
|
|
|